悬挂插针式分度盘筛选机

Screening machine for hanging needle dividing plate

可检测项目

Suitable for

○螺纹直径公差检；○头部最大/最小对边公差检测；

○螺纹牙底径检测；○最大/最小对角公测；○斜牙检测；

○螺纹牙中径检测；○内孔与外圆同心度检测；○牙距检测；

○内孔径有无毛刺检测；○头部有无电镀检测；

○有无螺纹检测；○头部表面开裂(有油件、侧面开裂除外)；

○粗细牙检测；○内孔直径公差；○尾端尖锐度检测；

○有无焊点及焊点数检测；○头部真圆度测量；

○焊点面积检测；○各部位台阶公差检测；○梅花形状检测；

○头部厚度公差检测；○有无牙检测；○牙部长度公差检测；

○针孔堵塞检测；○有无十字针孔；

○Thread diameter tolerance detection; ○Maximum / minimum alignment tolerance detection on head;

○Threaded teeth bottom diameter detection;○ Maximum/minimum diagonal tolerance detection; Oblique teeth detection;

○Thread middle diameter detection;○ Concentricity detection of inner hole and outer circle; ○Distance detection between teeth;

○Detection for burr in internal aperture or not;○ Electroplating on head or not;

○Thread or not; ○Head surface cracking (except for with oil parts and side cracking).

○Teeth thickness detection;○ Diameter tolerance of inner hole; ○Sharpness detection of end;

○Detection for solder joint or not and the number;○ Head roundness measurement;

○Solder joint area detection; Step tolerance detection of each part; ○Shape detection of plum blossoms;

○Head thickness tolerance detection; ○Teeth or not; Detection of tooth length tolerance;

○Pinhole blockage detection;○ Cross pinholes or not;

参数规格

Specifications

本机台外观尺寸(长*宽*高)：

约1000mm*1000mm*2300mm

机台重量：约650KG

更换规格：约20分钟

检测范围：

长度:30-100mm;直径：3-12mm  

速度最快可达400支/分钟

电源：交流单项220V  50HZ

可装4支CCD

功率：约3KW

运转方式：连续运转方式

Product Size(L x W x H):

About 1000mm*1000mm*2300mm

Machine weight: about 650KG

Replacement specification: about 20 min

examination range:

Length: 30-100mm; Diameter: 3-12mm

The fastest speed:400pcs / min

Power: AC single 220V 50HZ

Can carry 4 CCD

Power: about 3KW

Mode of operation: mode of continuous operation